英语翻译Turnouts will normally be laid without cant working draw

英语翻译
Turnouts will normally be laid without cant working drawings of all turnouts shall be presented by the contractor to the engineer for approval before placing the order with the manufacturer.
原文
Turnouts shall be 1 in 16,1 in 12,1 in 10,and 1 in 8 1/2,with built-up crossings,fixed-heel flexible switches with straight planning,all to NRC standard drawings and relevant British standards.Stretcher bars and operating roddings shall be fitted in accordance with NRC drawings.Facing point locks and detectors to signal wires shall be provided where ordered by the Engineer.The use of manual or electric switch drive shall be as directed by the engineer.
Turnouts will normally be laid without cant working drawings of all turnouts shall be presented by the contractor to the engineer for approval before placing the order with the manufacturer.
--------------------------------------------
2楼是自己翻译的,
312526579 1年前 已收到3个回答 举报

文刀是我 幼苗

共回答了18个问题采纳率:94.4% 举报

道岔应1 16,1在12,1 10,并在8 1 1 / 2,内置了通道,固定直规划,脚跟灵活开关的所有核管理委员会的标准图纸和有关的英国标准.担架酒吧和经营roddings须安装在美国核管理委员会按照图纸.面对点锁和探测器信号线时,须提供由工程师命令.在手动或电动开关驱动器的使用应视为指示,工程师.
道岔,通常会以无法工作的所有道岔图纸应由到放置前与制造商订单批准工程承包者介绍.

1年前

6

yww8711 幼苗

共回答了1个问题 举报

即使在下单给厂商前,没有承包商提供给工程师确认的岔道斜坡施工图,岔道也可以摆放得很好

1年前

1

领--袖 幼苗

共回答了5个问题 举报

第一段
道岔,通常会以无cannot工作的所有道岔图纸应由到放置前与制造商订单批准工程承包者介绍。
原文
道岔应1 16,1在12,1 10,并在8 1 1 / 2,内置了通道,固定直规划,脚跟灵活开关的所有核管理委员会的标准图纸和有关的英国标准。担架酒吧和经营roddings须安装在美国核管理委员会按照图纸。面对点锁和探测器信号线时,须提供由工程师命令。在手动或电动开关驱...

1年前

1
可能相似的问题
Copyright © 2024 YULUCN.COM - 雨露学习互助 - 18 q. 1.633 s. - webmaster@yulucn.com