英语翻译Problem 5:Device shows NO GSM when bootingThe radio stac

英语翻译
Problem 5:Device shows NO GSM when booting
The radio stack is screwed,you don't get GSM signal and the phone says unknown SIM status
Device won't start after trying to unlock it with HTC Universal Unlocker (HTC_Uni_SIM_Unlock_v1)
Here is how to fix it:
METHOD 1
1.Disable activesync on your computer by right click on activesync icon -> connection settings -> uncheck "allow USB connections".
2.Put your Hermes in bootloader mode
3.Connect device to computer using USB cable.
4.Open mtty.exe and select USB port,then connect.
5.Hit enter twice,you will see the "USB>" prompt.
6.
Type the following commands (do not copy paste!)
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
7.If the password does not work,try password BsaD5SeoA
8.Reset your phone and put it back in bootloader mode
9.If your bootloader version is different than 1.04 then Flash Bootloader version 1.04 (if you can't flash the bootloader version 1.04 (for what ever reason) and you have KITL enabled Rom,then there is final solution - PB_KITL_HERMES))
10.Flash the patched radio used to simunlock the Hermes
11.Your phone should be alive again :)
METHOD 2
Also,Ive found that Hard-Reseting the device restores GSM.
1.Remove the battery
2.wait 10 second
3.Re-insert Battery
4.Turn the device on
5.Watch for "NO GSM" on boot
6.if you see it.Return to step 1.(sometimes you have to do it up to 20 times)
If you see two lines of text flash up instead of 'No GSM' it means the GSM is functioning.For me this restored my radio in just 4 tries.
This ONLY works if your radio is NOT corrupted,but if you tried to updgrade and stalled between 0% and 15% of the GSM upgrade,it depends on the radio version you were trying to flash.But it's worth a try,the only downside is if your phone crashes,it will more than likely boot up with 'No GSM' so you'll have to do all over again.