当水中Mg2+含量低时,以铬黑T作指示剂测定水中Ca2+.Mg2+总量,终点不明.

当水中Mg2+含量低时,以铬黑T作指示剂测定水中Ca2+.Mg2+总量,终点不明.
常在水样中先加少量MgY2+配合物再用EDTA滴定,终点就敏锐
这样做对测定结果有无影响?说明其原理
jianxunwu 1年前 已收到2个回答 举报

彩柏柠 幼苗

共回答了12个问题采纳率:100% 举报

In titration of Ca2+,add MgY2- to enhance the color change at the end point.When MgY2- mixes with Ca2+,following reactions happen:
1.MgY2- + Ca2+ -----> Mg2+ + CaY2- (they are all colorless)
2.Mg2+ + Black T -----> red complex
at the end point,in order to eliminate the red color due to the Mg2+_black T complex,additional EDTA is needed to replace black T and to form MgY2-.The amount of EDTA required for this replacement is exactly the same as the amount of Y4- passed to Ca2+ from the initially added MgY2-.So the overall mole number of EDTA is exactly equal to the mole number of Ca2+,and is not impacted by the amount of MgY2- added.

1年前

6

左左的右耳 幼苗

共回答了1个问题 举报

滴定中Ca2 +,添加MgY2加强在终点的颜色变化。当MgY2与钙混合,发生如下反应:
1。 MgY2+钙+-----> Mg2 +的+ CaY2,(它们都是无色)
2。 Mg2 +的+黑色T----->红色络合物
在终点,以消除由于Mg2 +的_black T复合红色,额外的EDTA的需要更换黑色T和形成MgY2-。正是这种替换所需的EDTA量Y4的传递从最初添加钙离子量...

1年前

13
可能相似的问题
Copyright © 2024 YULUCN.COM - 雨露学习互助 - 17 q. 0.023 s. - webmaster@yulucn.com